JOBO System 1520 2x35mm Tank +1 espiral

ADOX SILVERMAX Developer 250 /100 / 50 ml Concentrate

SILVERMAX developer has ben especially formulated for the SILVERMAX 21 film.

It is activating the silent reserve sleeping in each SILVERMAX 21 film by expanding the photographic capabilities of the film.

The DMAX is reduced and the curve extended. Thus SILVERMAX developer yields in combination with SILVERMAX 21 film a total of up to 14 zones in the negative.

Dilution: 1+29 (10 ml plus 290 ml of water to mix 300 ml)

Developing time for SILVERMAX 21 film: 11 Minutes at 20°C

(Agitate the first half minute continuosly and then tilt every 30 seconds once)

ADOX ADOSTOP ECO Geruchloses Stoppbad mit Indikator 1000 ml Concentrate

B&W and Color

ADOX Adofile PolypropyleNe Negative Sleeves For 9x12 cm (4x5-Sleeves)

ADOFILE polypropylene for filing 4x5 plate negatives

ADOFILE Polypropylene negative file sheets 

Clear pages for archiving, viewing and contact printing. 

The pages are adapted both from 3 rings to 4 ring binders. Both ends of the negative sleeves are open, allowing for air exchange. Polypropylene is absolutely chemically neutral and the security file

ADOX Adofile Polypropylene Negative Sleeves For Medium Format 6x6/6x7/6x9 Oversized

ADOFILE Negative file pages are made of high-grade polypropylene. The 6x7/6x9 variety is somewhat narrower than the 6x6 version, so that all sizes of medium format negatives fit inside.

The pages fit in both 3 ring an 4 ring binders. Both ends of the negative sleeves are open, allowing for air exchange. The polypropylene is absolutely chemically neutral and archive-safe.

Polypropylene files are more stable than those made from acetate and thus easier to load.

The slight difference in thickness leads to a theoretical lower resolution of a contact print through the file though (compared to the thinner acetate sleeves).

ADOX Adofile Polypropylene Negative Sleeves 35mm Oversized

ADOFILE Negative file pages are made of high-grade polypropylene. They are 1-2cm oversized, so that a stip of 6 negatives fits completely into the sleeve without any overhang.

The pages fit in both 3 ring an 4 ring binders. Both ends of the negative sleeves are open, allowing for air exchange. The polypropylene is absolutely chemically neutral and archive-safe.

Polypropylene files are more stable than those made from acetate and thus easier to load.

The slight difference in thickness leads to a theoretical lower resolution of a contact print through the file though (compared to the thinner acetate sleeves).

Negative file sheet for 35m

Pergamine sheets of paper are of course cheaper and somewhat better for filing, as their porosity allows moisture to evaporate. However, parchment has the disadvantage of not being transparent, so you will have to remove the negatives to look at them or make contacts.

Hoja archivador de negativos para 120m

Pergamine sheets of paper are of course cheaper and somewhat better for filing, as their porosity allows moisture to evaporate. However, parchment has the disadvantage of not being transparent, so you will have to remove the negatives to look at them or make contacts.

Hoja archivador para diapositiva de 120m para marquitos 6x6

Marquito de cartón 7x7 para negativos o diapositivas de 6x6

JOBO 1510: 1x35mm Tank +1 Reel

JOBO Tank for film developing

Tank System 1500

Film tanks for B/W and color developing

The Jobo film developing tanks are among the best on the market. The tanks can be combined with extension modules, for example the 3-film tank extension 1530. Depending on which lid you have on the tank, you can use it for either normal hand developing or use it in one of the many processors that are available (with cog lid for the models with a lifter, and with magnet lid for those models without lifter). With the extension modules, you can quickly turn a 2-film tank into a 5-, 7-, or 8-film tank. 

The tanks come with a maximum of one spiral. Most are delivered with the plastic lid for hand-developing. By adding a cog to the lid, you can use any tank in a processor. If you want to develop both with a processor and by hand, it is better to purchase the complete cog lid.

JOBO System 1540 4x35mm Tank

JOBO Tank for film developing

Tank System 1500

Film tanks for B/W and color developing

The Jobo film developing tanks are among the best on the market. The tanks can be combined with extension modules, for example the 3-film tank extension 1530. Depending on which lid you have on the tank, you can use it for either normal hand developing or use it in one of the many processors that are available (with cog lid for the models with a lifter, and with magnet lid for those models without lifter). With the extension modules, you can quickly turn a 2-film tank into a 5-, 7-, or 8-film tank. 

The tanks come with a maximum of one spiral. Most are delivered with the plastic lid for hand-developing. By adding a cog to the lid, you can use any tank in a processor. If you want to develop both with a processor and by hand, it is better to purchase the complete cog lid.

JOBO 1501 Spiral Duo Set (SOLO ESPIRAL)

Espiral blanca para todos los depósitos de la serie 1500. 

Ajustable a película de 35 mm o 120 de formato medio.

Se puede utilizar con el clip DUO para dos rollos de película seguidos.

La imagen muestra la espiral una vez en 35mm y una vez en posición de rollo de película.

El nombre "DUO-Set" se refiere al uso "dual" o a la posibilidad de cargar dos películas en UNA espiral con el clip DUO.

Usted compra UNA espiral por una película de 35mm O rollo.

Bolso cambiador PATERSON grande: 70,0x70,0 cm

Bolso cambiador Paterson - El cuarto oscuro para el camino!

Indispensable para gran formato, alta velocidad y como protección adicional contra la luz para fotógrafos infrarrojos al insertar rollos de película. El salvador en caso de rotura de la película cuando el contador está en la Fig. 39. Revele las películas sin su propio cuarto oscuro insertando la película en la bolsa de cambio dentro de la lata de revelado mientras está en movimiento (no funciona con infrarrojos). Doble cremallera de seguridad para el saco exterior e interior contra la incidencia de la luz. Material de revestimiento interior repelente al polvo. 70x70 cm de ancho, suficiente para un 4x5".