Kit C41 Tetenal 2,5 litros

ADOX Adofile Polypropylene Negative Sleeves 35mm Oversized

ADOFILE Negative file pages are made of high-grade polypropylene. They are 1-2cm oversized, so that a stip of 6 negatives fits completely into the sleeve without any overhang.

The pages fit in both 3 ring an 4 ring binders. Both ends of the negative sleeves are open, allowing for air exchange. The polypropylene is absolutely chemically neutral and archive-safe.

Polypropylene files are more stable than those made from acetate and thus easier to load.

The slight difference in thickness leads to a theoretical lower resolution of a contact print through the file though (compared to the thinner acetate sleeves).

Negative file sheet for 35m

Pergamine sheets of paper are of course cheaper and somewhat better for filing, as their porosity allows moisture to evaporate. However, parchment has the disadvantage of not being transparent, so you will have to remove the negatives to look at them or make contacts.

Hoja archivador de negativos para 120m

Pergamine sheets of paper are of course cheaper and somewhat better for filing, as their porosity allows moisture to evaporate. However, parchment has the disadvantage of not being transparent, so you will have to remove the negatives to look at them or make contacts.

Hoja archivador para diapositiva de 120m con marquitos 6x6

Marquito de cartón 7x7 para negativos o diapositivas de 6x6

Pinzas Paterson para negativo

Pinzas Paterson para papel

Kit E6 Tetenal 5 litros

Kit de revelado E-6 indicado especialmente para procesadoras tipo JOBO se pueden revelar 60 rollos de 35 mm

PATERSON Film Developing Tank 2x35mm + 2 Reels

Paterson System 5 drip-free film developing tank

Very good film developing tank from Paterson in England.

Patented large rubber lid that really seals itself to the tank. Tanks, that barely drip. Very good value for the money.

2 x 35mm or 1 x 120 film. Includes two film reels.

The film reels are made with quality construction and reel the film in (like the AP reels) automatically with little beads.

The tank sits well in the hand for inversion during developing, and you can grip it easily while removing or replacing the lid.

The reels from Paterson and the economical AP-Tanks are interchangeable. So if you already have the AP reels and just want to upgrade the tank, you can do that too.

FOTOIMPEX Basic Develop Kit

The basic film development kit contains everything you need for black and white development.

The kit contains:

A Paterson two film tank with two spirals

A thermometer

One 25 ml measuring cylinder

50 m film developer

100 ml of ADOFIX Fixative

50 ml of ADOFLO wetting agent

You can develop 5 films with this kit before you have to change the chemicals.

The following items are supposed to be in your home:

A dark room for loading the film (alternatively buy a changing bag)

One stopwatch (mobile)

a pair of scissors

One pair of clothespins for hanging the film for drying

JOBO 1510: 1x35mm Tank +1 Reel

JOBO Tank for film developing

Tank System 1500

Film tanks for B/W and color developing

The Jobo film developing tanks are among the best on the market. The tanks can be combined with extension modules, for example the 3-film tank extension 1530. Depending on which lid you have on the tank, you can use it for either normal hand developing or use it in one of the many processors that are available (with cog lid for the models with a lifter, and with magnet lid for those models without lifter). With the extension modules, you can quickly turn a 2-film tank into a 5-, 7-, or 8-film tank. 

The tanks come with a maximum of one spiral. Most are delivered with the plastic lid for hand-developing. By adding a cog to the lid, you can use any tank in a processor. If you want to develop both with a processor and by hand, it is better to purchase the complete cog lid.

Sistema JOBO 1520 2x35mm Tanque +1 Espiral

JOBO Tanque para revelado de película

Sistema de tanque 1500

Depósitos de película para revelado en B/N y color

Los tanques de revelado de película Jobo se encuentran entre los mejores del mercado. Los depósitos pueden combinarse con módulos de ampliación, como por ejemplo el módulo de ampliación de depósito de 3 películas 1530. Dependiendo de la tapa que tenga en el tanque, puede utilizarla para el revelado manual normal o en uno de los muchos procesadores disponibles (con tapa de piñón para los modelos con elevador y con tapa magnética para los modelos sin elevador). Con los módulos de ampliación, puede convertir rápidamente un depósito de 2 películas en un depósito de 5, 7 u 8 películas. 

Los tanques vienen con un máximo de una espiral. La mayoría se entregan con la tapa de plástico para el desarrollo manual. Añadiendo un diente a la tapa, puedes usar cualquier tanque en un procesador. Si desea desarrollar tanto con un procesador como a mano, es mejor comprar la tapa completa del engranaje.

JOBO System 1540 4x35mm Tank

JOBO Tank for film developing

Tank System 1500

Film tanks for B/W and color developing

The Jobo film developing tanks are among the best on the market. The tanks can be combined with extension modules, for example the 3-film tank extension 1530. Depending on which lid you have on the tank, you can use it for either normal hand developing or use it in one of the many processors that are available (with cog lid for the models with a lifter, and with magnet lid for those models without lifter). With the extension modules, you can quickly turn a 2-film tank into a 5-, 7-, or 8-film tank. 

The tanks come with a maximum of one spiral. Most are delivered with the plastic lid for hand-developing. By adding a cog to the lid, you can use any tank in a processor. If you want to develop both with a processor and by hand, it is better to purchase the complete cog lid.